20", 23", 26", 27",32" and 42" TFT
LCD TV / MONITOR
Revision Records :
1. Application
1. The Analog graphics signals are supported
through a VGA connector.
2. High Density component Video Signals are supported through
RCA connectors
3. A high quality Video Anti-alias Filter provides sharp
Video band-limiting function for demanding video application.
4. Digital graphics/Video Signals are supported through
a DVI connector. This signal from DVI connector goes to
the gm1501 ultra reliable DVI Receiver.
5. Separate EDIDs for analog and digital RGB are provided
on board.
6. High quality Micronas Video decoder is provided to input
alternate source of Video inputs.
7. A Philips TV Tuner is Provide to capture off air and
cable inputs.
8. V-chip functions for Tuners and CC for both Video decoders
(Both Main and PIP).
9. VGA can display between 640 x 480 50Hz up to 1280 x 1024
70Hz.
10. YPbPr can display mode: 480i, 480p, 576i, 576p, 720p,
1080i
11. A Multi standard Audio processor (Micronas MSP3450)
for audio decoding and switching.
12. Head–Phones and Speaker output Jacks.
13. FET switches for cutting off power to most external
peripherals in low power mode.
14. Support High-bandwidth Digital Content Protection (HDCP)
which is a standard put forth by Intel Corporation to protect
DVI output from being copied.
15. Scaling and de-interlacing is done through the gm1501.
16. Frame rate conversion is supported by the 4Mx32 DDR
SDRAM.
17. A 512k x 8 (can be up to 1024k x 8) Flash ROM is used
for storing system firmware.
18. The reference board also has In System Programming (ISP)
capability for the external FLASHROM using the DDC2Bi. This
can be done using the VGA or DVI-D connectors on the Board.
